NTT FLET’S Hikari Next Type

NTT FLET’S Hikari Next Type is an inexpensive plan that uses NTT FLET’S for the last mile in addition to Private Connect port fees.

If you can prepare the FLET’S Hikari Next line from NTT East or NTT West, you can simply connect the “Cloud Gateway” to the network switch at your location (office, etc.) to enable L2 extension (extension on the same segment) to the cloud using the same IP address.

This is a service that allows you to easily migrate on-premise systems to the cloud.

PRC FLET’S Hikari Next Type Application – From Start of Use

Advance preparation

Please make arrangements in advance for a dedicated NTT FLET’S Hikari Next type line.

For information on the types of FLET’S Hikari Next, please refer to Support Information/Manuals/Private Connect Service/NTT FLET’S Hikari Next Types/Product Specifications .

Application

The following information is required when applying for PRC FLET’S Hikari Next Type.

Address of the connection location	This is the address of your on-premise location. Please include the address of your office, data centre, etc., including the building name.
Cloud Gateway Shipping Address	Please enter the address to which the cloud gateway will be shipped.
Area	Either NTT East or NTT West
NTT FLET’S line type	Please prepare the following lines in advance. NTT East area FLET’S Hikari Next Family Giga Line FLET ‘S Hikari Next Family High Speed ​​NTT West area FLET’S Hikari Next Family Super High Speed ​​Type Hayabusa Please check the following. ・NTT rental ONU is prepared exclusively for Private Connect FLET’S Hikari Next Type. ・IPv6 option has been contracted. ・Hikari telephone is not superimposed on the same line.
Destination Region	Kanto, Chubu, Kansai, or Kyushu
Other things to check	In the Private Connect service, the network segment at the user site has a connection point at L2. Are you the person in charge of the network and security policy, or have you obtained permission from that person?
VLAN-VNS Mapping	Please enter the on-premise VLAN number and the VNS name to connect to .(Example) VLAN number = VNS name111 = YCN-LAN0 112 = YCN-DBMS0 113 = YCN-PRIV0 …

Cloud Gateway Connection

Once the cloud gateway arrives at your shipping address, please connect it.

For wiring, please refer to the Support Information/Manual/Private Connect Service/NTT FLET’S Hikari Next Type/Installation of Cloud Gateway .

After connecting the cables, power on the cloud gateway and check that the link is up for both GE0 and GE1. After a while, the PPP lamp will light up.

Note: Loop detection

PRC periodically sends keepalive frames to detect loops in order to prevent a total network failure caused by a loop on the on-premise side. Therefore, if there is a loop on the on-premise site, the PRC network port is designed to automatically go down for protection.

If you believe that an automatic block has occurred, please contact us at the following email address:
» info@logiqlinux.com

Connection complete

Once the connection is complete, communication will be possible between the on-premise VLAN and the servers connected to the VNS in the cloud.

Please check the connection between each VLAN and VNS.